Công ty TNHH Công nghệ Hoàng Phú Quý
Địa chỉ: 519/10 đường Số 10, Phường 8, Quận Gò Vấp, Thành Phố Hồ Chí Minh
Website: http://hpqtech.com
Website2: http://tudonghoa-vietnam.weebly.com
Website3: http://vietnamfuses.mov.mn
Điện thoại: +84-6295-8401 Fax:+84-6295-8402
Thông tin liên hệ: Mr Nguyễn Đình Đông [email protected] (0938-371-389)
Công ty TNHH Công nghệ Hoàng Phú Quý là nhà cung cấp độc quyền sản phẩm Cảm biến Cảm biến LAMTEC, ST CarboSen LAMTEC, LAMTEC vietnam distributor
LAMTEC cung cấp một loạt các cảm biến CO2 và hydro sản phẩm. Cảm biến mô hình ST CarboSen tính năng hành vi cảm biến nhanh chóng (<1 giây), họ không cần phải tham khảo hòa nhiệt độ và họ có khả năng lắp đơn giản. Những cảm biến này có các ứng dụng cho đo khí thải dao động lên đến 450 ° C và hệ thống đốt với công suất trung bình. Cảm biến mô hình hydro là một chất điện phân rắn cảm biến nhỏ đó là dựa trên nguyên tắc không Nernstian. Những cảm biến này có phạm vi đo từ 0 đến 1,000 ppm và phát hiện giới hạn từ 1 đến 2 ppm. Họ là lý tưởng cho các ứng dụng dẫn và giám sát an toàn (ví dụ, electrolysers hoặc các tế bào nhiên liệu).
CO2 và hydro cảm biến
LAMTEC cung cấp một loạt các cảm biến CO2 và hydro sản phẩm. Cảm biến mô hình ST CarboSen tính năng hành vi cảm biến nhanh chóng (<1 giây), họ không cần phải tham khảo hòa nhiệt độ và họ có khả năng lắp đơn giản. Những cảm biến này có các ứng dụng cho đo khí thải dao động lên đến 450 ° C và hệ thống đốt với công suất trung bình. Cảm biến mô hình hydro là một chất điện phân rắn cảm biến nhỏ đó là dựa trên nguyên tắc không Nernstian. Những cảm biến này có phạm vi đo từ 0 đến 1,000 ppm và phát hiện giới hạn từ 1 đến 2 ppm. Họ là lý tưởng cho các ứng dụng dẫn và giám sát an toàn (ví dụ, electrolysers hoặc các tế bào nhiên liệu).
CO2 và hydro cảm biến
LAMTEC cung cấp một loạt các cảm biến CO2 và hydro sản phẩm. Cảm biến mô hình ST CarboSen tính năng hành vi cảm biến nhanh chóng (<1 giây), họ không cần phải tham khảo hòa nhiệt độ và họ có khả năng lắp đơn giản. Những cảm biến này có các ứng dụng cho đo khí thải dao động lên đến 450 ° C và hệ thống đốt với công suất trung bình. Cảm biến mô hình hydro là một chất điện phân rắn cảm biến nhỏ đó là dựa trên nguyên tắc không Nernstian. Những cảm biến này có phạm vi đo từ 0 đến 1,000 ppm và phát hiện giới hạn từ 1 đến 2 ppm. Họ là lý tưởng cho các ứng dụng dẫn và giám sát an toàn (ví dụ, electrolysers hoặc các tế bào nhiên liệu). CO2 và hydro cảm biến.
FFS06Weight:0,4 kg Protection class:IP 65Ambient temperature:-10°C ... +60 °CFFS05 UV- ... Weight::0,4 kgProtection class:IP 65Ambient temperature:-10°C ... +60 °CFFS05 ... Ex Weight::1,6 kgProtection class:IP 65Ambient temperature:-10°C ... +60 °CFFS05 ...Ex-II Weight::0,4 kgProtection class:IP 65Ambient temperature:-10°C ≤ Ta ≤ +60 °CSupply voltage:24 V DC ± 20% ≤ 3,5 W Flame and fault contact:≤ 50 V DC, ≥ 6 V DC≤ 0,5 A, ≥ 1,0 mA potential-freeFrequency range:10 / ... / 110 ... 210 Hz7 levels in the standard versionSafety time "Operation":t ≤ 1 sek. (standard)t ≤ 1, 2, 3, 4, 5 sek. (selectable)Operating mode:Continuous operationDegree of protection:IP 67Ambient temperature:- 30 ... + 75°C< - 30 ... > +75°C with accessoriesDimensions:Total length 195 mmDiameter 99 mmWeight:0,6 kgSupply voltage24 V DC ± 20%, ≤ 4 WattsRelay contact outputpermissible switching voltagemax. 50 V DC min. 6 V AC/DCSPDT, isolatedpermissible current switching.max. 0,5 A min. 1,0 mAFrequency range10 ... 190 Hz (F 200 K1...)10 / 20 / 30 ... 190 Hz (F 200 K2...)Safety time ''operation''t ≤ 1s (standard)t ≤ 3 sec. (on request, factory setting)Operating conditionfor continuous operation Protection classIP 67Operating temperature- 20 ... + 60°CWeight0,6 kgDimensiontotal length: 180 mmdiameter: 40 mm / 80 mmSupply voltage24 V DC ± 20%, ≤ 4 Watts Relay contact closurepermissible voltagemax. 50 V DC min. 6 V AC/DCSPDT, isolatedpermissible current0,5 A max. 1,0 mA min.Frequency range10 / 20 / 30 ... 190 Hz Safety time ''operation''t ≤ 1 sec. (standard)t ≤ 3 sec. (on request, factory setting)Operating conditionfor continuous operation Protection classIP 66Operating temperature- 20 ... + 60°CWeight2,0 kgDimension216 mm; total lengthdiameter: 60 mm / 90 mmConnection diameter1 1/4”,connection only with adjusting devices FV 19-10 or FV 20-10Sensitivity gauging output:> 10 mV AC (FFS07, FFS08 IR) Output parameter (Signal channel A+B) Max. >70 HzFrequency:Min. < 7 HzProtection Class:DIN EN 60529:2000, IP67Environment temperature:IR: -20 … +60 °CRelative humidity:0% … 95% not condensatingWeight:0,4 kgWear parts:nonSafety Integrity Level:DIN EN 61508 Teil 2 – SIL 2Measuring systemZirkonium-dioxide cell / current-probe
Measuring principleCurent probe (Current-mode)
Probe current = linear ƒ(O2-content)
Probe current for 21 Vol.%O2300 to 600 mA
Operating temperature of measuring cell (sensor)750 to 850° C
Heating-up time60 min. until readiness for operation at 21% O2
120 min. until thermal balance
Setting time after measurement-value jumpt90 < 20 sec with standard measuring-gas-extractor, 450 mm long
Range of measuring0-21 Vol. % O2 at calibration
with ambient air
Preciseness of measuring± 0,2 Vol. % O2 after calibration with ambient air
Protection typeIP 42
Probe signal0...400/600mA
TUV suitability approved13. and 17.BlmSchV with Lambda Transmitter LT1
Measuring systemZirkonium-dioxide current probe
Probe signal-30....150mV
Exhaust gas temperatureLS2 up to 300 °C;
LS2-K up to 400 °C;
LS2-Ex up to 500 °C
LS-HT up to 1200 °C
Heating-up timeIn 10 min. ready for measuring
Setting time after t90 < 15s
measurement value jump
Range of measuring0-21 Vol. % O2
Preciseness of measuring± 10. % of measurement value,
not better than ±0,3 Vol.%
Protection typeOptional: Ex (Zone I + II)
Range of measuring O2:0...18%Vol. O2 - with limitations 0...21 Vol.% O2
COe: 0...1.000 ppm COe, 0...10.000 ppm COe on request
Preciseness of measuring:O2: +-5% of measuring value – not better than +- 0,3 Vol.%
COe: +-25% of measuring value – not better than +- 10 ppm
after prior alignment of application conditions with a CO reference measuring in a range of measuring 0...100 ppm: <= 10 ppm
Response time t60:O2 <= 10 seconds
(60% of final value)COe <= 2 seconds
Failure impact:Change of temperature of measuring gas in dependency of preciseness of temperature control of ZrO2 measuring cell
Cross-sensitivity:against SO2, NH3, NO, Propan, other arenes
Allowed fuelsResidue-free, gaseous hydrocarbons, light fuel oil and brown coal / black coal
Allowed <= 300°C (Article-No. 656R2000)
constant exhaust gas temperature<= 450°C (Article-No. 656R2010 / 656R2012)
Operating temperature Probe housing <= 400 °C (measured at hexagonal)
(KS1-D sensor)
Cable bushing <= 200 °C
Connecting cable <= 150 °C
Durability>= 3 years at oil and domestic gas
Probe output voltage 0,01...21 Vol.% O2: 800...-30mV (O2-electrode) <-> 0...21Vol.% O2
0...10.000 ppm: -30...800mV (CO/H2-electrode) <-> 0...10.000ppm COe
Probe internal resistance RI 15...30 Ohm O2 - electrode 1
in air at 20 °C and 20 W Heat output (new probe) 15...30 Ohm CO/H2 - electrode 2
Heat output at ambient temperature18...25 W - depending on type
Isolation resistance between heating and probe connector> 30 MOhm
Power supplyat connector (D/C- A/C voltage)
at PH 18 VA -> 11,4 V
at PH 20 VA -> 12,34 V
at PH 25 VA -> 14,8 V
Heat output for appr. 18 W
TGas = 350 °C
Heat current atappr. 1,6 A
PH 20 VAappr. 5A shortly at heating-up
PTC-characteristique
Dimensions of probe
KS1D sensorLength 115 mm; thread M18 x 1,55 mm
KS1D with housingLength 185 mm; R 1 1/4“, D=31,75 mm
Preciseness:±0,2 Vol. % O2 after balancing on air value 21 % O2
(with Lambda-probe LS1)
Setting time:<20 s on 90 % of final value (T90)
(with Lambda probe LS1 type 650 R 0001 and 450 mm MEV)
Failure impact1 % of measurement value / 10 K housing temperature Lambda probe LS1,
Deviation by temperaturetemperature compensation optional
Failure impact1,3 % of measurement value / 10 mbar pressure change / pressure compensation optional
Deviation by pressure
Ambient temperature
- operation0°C...+60°C
- transport and storage-40°C...+85°C
Supply voltage230V AC and 115 V AC
+10% / -15%, 48Hz...62Hz
To be used in grounded network lines only!
Resolution0,01% over the whole range
Time for being ready with LS11...2 hours after "POWER ON"
Measuring accuracy+/- 10% of measured value
(with Lambda Probe LS2)max. +/-0,3% by vol. O2
Settling time (90% time)T90 < 15s
Ambient temperature
- Operation -20°C...+60°C
- Transport and storage-40°C...+85°C
Power supply230 V AC und 115 V AC
+10% / -15%, 48 Hz...62Hz
Power consumptionTypically 50 VA, short-term 150 VA (probe heating-up phase)
Time for operational status approx. 10 minutes after "POWER ON"
to be achieved with
Housing:Sheet steel
Protection type following DIN 40050IP66, without display
IP54, with embedded start-up assistant inside front door
Dimensions (HxBxT) mm300 x 300 x 120
ColorGrey, RAL 7035
Weightappr. 6kg
Ambient temperature-5 °C ... + 60 °C
operation:
Ambient temperature-20 °C ... + 70 °C
transport and storage:
Power supply:120 VAC / -30%...230 VAC / +10%, 50...60Hz
Power consumption:30W (normal operation)
69W (heating)
Resolution O2:0,1 Vol. % O2 in the range of 0...18 Vol. % O2
1 Vol. % O2 in the range of 18...25 Vol. % O2
Resolution COe:1ppm in CO-range of 0…1000ppm
Preciseness of measuring: O2: ±5% of measurement value
(with combination probe KS1D)(max ± 0,3 Vol. % O2)
COe: ±25% of measurement value
(not better than +/- 20 ppm after prior calibration for application conditions with a CO-reference measuring)
Setting time (60 % time):O2: T 60 < 10 s
COe: T 60 < 2 s
Time for readinessappr. 10min after „POWER ON“
with KS1D (cold start-up)(Initial start-up appr. 60min)
Analogue output, via analogue output module:Analogue output 1 (O2 measurement value)
- Range of setting: 0…25 % O2
- Factory setting 0…10 Vol.% O2 -> 4…20 mA
Analogue output 2 (CO-measurement value)
- Range of setting: 0…1000 ppm
- Factory setting 0…1000 ppm -> 4…20 mA
Digital outputsoptional
via digital output module:
Control element:Integrated LT3 User Interface with LCD-graphic display 45x27 mm (BxH)
External start-up assistant with LCD-graphic display 60x32 mm (BxH) (Option)
Interface:LAMTEC System Bus (LSB)
Sensor TypeCarboSen
Principle of measurementsolid state electrolyte (Non-Nernst)
Measurement range0... 10 000 ppm COe
Sensor temperatureapprox. 630 °C
Sensor heater powerapprox. 3.0 W
Response time< 1 s
Sensor signal0 – 750 mV (s. curve)
Temperature range in applicationup to 450 °C (depends on housing)
Housing, electronicscustomized
Output0/4 – 20 mA and CAN-bus
Sensor type: HydroSen
Measurement principle:Solid-electrolyte (Non-Nernst)
Range of measuring:0 – 1.000 or 0 – 10.000 ppm H2 (max. 50 % UEG)
Sensor temperature:630°C
Sensor heat output:ca. 3,0 W
Reaction time of sensor element:< 1 s
Sensor signal:0 – 700 mV
Temperature - are of use:up to a maximum of 450 °C (depends on housing)
Output electronics:0/4 – 20 mA and LAMTEC system bus
Địa chỉ: 519/10 đường Số 10, Phường 8, Quận Gò Vấp, Thành Phố Hồ Chí Minh
Website: http://hpqtech.com
Website2: http://tudonghoa-vietnam.weebly.com
Website3: http://vietnamfuses.mov.mn
Điện thoại: +84-6295-8401 Fax:+84-6295-8402
Thông tin liên hệ: Mr Nguyễn Đình Đông [email protected] (0938-371-389)
Công ty TNHH Công nghệ Hoàng Phú Quý là nhà cung cấp độc quyền sản phẩm Cảm biến Cảm biến LAMTEC, ST CarboSen LAMTEC, LAMTEC vietnam distributor
LAMTEC cung cấp một loạt các cảm biến CO2 và hydro sản phẩm. Cảm biến mô hình ST CarboSen tính năng hành vi cảm biến nhanh chóng (<1 giây), họ không cần phải tham khảo hòa nhiệt độ và họ có khả năng lắp đơn giản. Những cảm biến này có các ứng dụng cho đo khí thải dao động lên đến 450 ° C và hệ thống đốt với công suất trung bình. Cảm biến mô hình hydro là một chất điện phân rắn cảm biến nhỏ đó là dựa trên nguyên tắc không Nernstian. Những cảm biến này có phạm vi đo từ 0 đến 1,000 ppm và phát hiện giới hạn từ 1 đến 2 ppm. Họ là lý tưởng cho các ứng dụng dẫn và giám sát an toàn (ví dụ, electrolysers hoặc các tế bào nhiên liệu).
CO2 và hydro cảm biến
LAMTEC cung cấp một loạt các cảm biến CO2 và hydro sản phẩm. Cảm biến mô hình ST CarboSen tính năng hành vi cảm biến nhanh chóng (<1 giây), họ không cần phải tham khảo hòa nhiệt độ và họ có khả năng lắp đơn giản. Những cảm biến này có các ứng dụng cho đo khí thải dao động lên đến 450 ° C và hệ thống đốt với công suất trung bình. Cảm biến mô hình hydro là một chất điện phân rắn cảm biến nhỏ đó là dựa trên nguyên tắc không Nernstian. Những cảm biến này có phạm vi đo từ 0 đến 1,000 ppm và phát hiện giới hạn từ 1 đến 2 ppm. Họ là lý tưởng cho các ứng dụng dẫn và giám sát an toàn (ví dụ, electrolysers hoặc các tế bào nhiên liệu).
CO2 và hydro cảm biến
LAMTEC cung cấp một loạt các cảm biến CO2 và hydro sản phẩm. Cảm biến mô hình ST CarboSen tính năng hành vi cảm biến nhanh chóng (<1 giây), họ không cần phải tham khảo hòa nhiệt độ và họ có khả năng lắp đơn giản. Những cảm biến này có các ứng dụng cho đo khí thải dao động lên đến 450 ° C và hệ thống đốt với công suất trung bình. Cảm biến mô hình hydro là một chất điện phân rắn cảm biến nhỏ đó là dựa trên nguyên tắc không Nernstian. Những cảm biến này có phạm vi đo từ 0 đến 1,000 ppm và phát hiện giới hạn từ 1 đến 2 ppm. Họ là lý tưởng cho các ứng dụng dẫn và giám sát an toàn (ví dụ, electrolysers hoặc các tế bào nhiên liệu). CO2 và hydro cảm biến.
FFS06Weight:0,4 kg Protection class:IP 65Ambient temperature:-10°C ... +60 °CFFS05 UV- ... Weight::0,4 kgProtection class:IP 65Ambient temperature:-10°C ... +60 °CFFS05 ... Ex Weight::1,6 kgProtection class:IP 65Ambient temperature:-10°C ... +60 °CFFS05 ...Ex-II Weight::0,4 kgProtection class:IP 65Ambient temperature:-10°C ≤ Ta ≤ +60 °CSupply voltage:24 V DC ± 20% ≤ 3,5 W Flame and fault contact:≤ 50 V DC, ≥ 6 V DC≤ 0,5 A, ≥ 1,0 mA potential-freeFrequency range:10 / ... / 110 ... 210 Hz7 levels in the standard versionSafety time "Operation":t ≤ 1 sek. (standard)t ≤ 1, 2, 3, 4, 5 sek. (selectable)Operating mode:Continuous operationDegree of protection:IP 67Ambient temperature:- 30 ... + 75°C< - 30 ... > +75°C with accessoriesDimensions:Total length 195 mmDiameter 99 mmWeight:0,6 kgSupply voltage24 V DC ± 20%, ≤ 4 WattsRelay contact outputpermissible switching voltagemax. 50 V DC min. 6 V AC/DCSPDT, isolatedpermissible current switching.max. 0,5 A min. 1,0 mAFrequency range10 ... 190 Hz (F 200 K1...)10 / 20 / 30 ... 190 Hz (F 200 K2...)Safety time ''operation''t ≤ 1s (standard)t ≤ 3 sec. (on request, factory setting)Operating conditionfor continuous operation Protection classIP 67Operating temperature- 20 ... + 60°CWeight0,6 kgDimensiontotal length: 180 mmdiameter: 40 mm / 80 mmSupply voltage24 V DC ± 20%, ≤ 4 Watts Relay contact closurepermissible voltagemax. 50 V DC min. 6 V AC/DCSPDT, isolatedpermissible current0,5 A max. 1,0 mA min.Frequency range10 / 20 / 30 ... 190 Hz Safety time ''operation''t ≤ 1 sec. (standard)t ≤ 3 sec. (on request, factory setting)Operating conditionfor continuous operation Protection classIP 66Operating temperature- 20 ... + 60°CWeight2,0 kgDimension216 mm; total lengthdiameter: 60 mm / 90 mmConnection diameter1 1/4”,connection only with adjusting devices FV 19-10 or FV 20-10Sensitivity gauging output:> 10 mV AC (FFS07, FFS08 IR) Output parameter (Signal channel A+B) Max. >70 HzFrequency:Min. < 7 HzProtection Class:DIN EN 60529:2000, IP67Environment temperature:IR: -20 … +60 °CRelative humidity:0% … 95% not condensatingWeight:0,4 kgWear parts:nonSafety Integrity Level:DIN EN 61508 Teil 2 – SIL 2Measuring systemZirkonium-dioxide cell / current-probe
Measuring principleCurent probe (Current-mode)
Probe current = linear ƒ(O2-content)
Probe current for 21 Vol.%O2300 to 600 mA
Operating temperature of measuring cell (sensor)750 to 850° C
Heating-up time60 min. until readiness for operation at 21% O2
120 min. until thermal balance
Setting time after measurement-value jumpt90 < 20 sec with standard measuring-gas-extractor, 450 mm long
Range of measuring0-21 Vol. % O2 at calibration
with ambient air
Preciseness of measuring± 0,2 Vol. % O2 after calibration with ambient air
Protection typeIP 42
Probe signal0...400/600mA
TUV suitability approved13. and 17.BlmSchV with Lambda Transmitter LT1
Measuring systemZirkonium-dioxide current probe
Probe signal-30....150mV
Exhaust gas temperatureLS2 up to 300 °C;
LS2-K up to 400 °C;
LS2-Ex up to 500 °C
LS-HT up to 1200 °C
Heating-up timeIn 10 min. ready for measuring
Setting time after t90 < 15s
measurement value jump
Range of measuring0-21 Vol. % O2
Preciseness of measuring± 10. % of measurement value,
not better than ±0,3 Vol.%
Protection typeOptional: Ex (Zone I + II)
Range of measuring O2:0...18%Vol. O2 - with limitations 0...21 Vol.% O2
COe: 0...1.000 ppm COe, 0...10.000 ppm COe on request
Preciseness of measuring:O2: +-5% of measuring value – not better than +- 0,3 Vol.%
COe: +-25% of measuring value – not better than +- 10 ppm
after prior alignment of application conditions with a CO reference measuring in a range of measuring 0...100 ppm: <= 10 ppm
Response time t60:O2 <= 10 seconds
(60% of final value)COe <= 2 seconds
Failure impact:Change of temperature of measuring gas in dependency of preciseness of temperature control of ZrO2 measuring cell
Cross-sensitivity:against SO2, NH3, NO, Propan, other arenes
Allowed fuelsResidue-free, gaseous hydrocarbons, light fuel oil and brown coal / black coal
Allowed <= 300°C (Article-No. 656R2000)
constant exhaust gas temperature<= 450°C (Article-No. 656R2010 / 656R2012)
Operating temperature Probe housing <= 400 °C (measured at hexagonal)
(KS1-D sensor)
Cable bushing <= 200 °C
Connecting cable <= 150 °C
Durability>= 3 years at oil and domestic gas
Probe output voltage 0,01...21 Vol.% O2: 800...-30mV (O2-electrode) <-> 0...21Vol.% O2
0...10.000 ppm: -30...800mV (CO/H2-electrode) <-> 0...10.000ppm COe
Probe internal resistance RI 15...30 Ohm O2 - electrode 1
in air at 20 °C and 20 W Heat output (new probe) 15...30 Ohm CO/H2 - electrode 2
Heat output at ambient temperature18...25 W - depending on type
Isolation resistance between heating and probe connector> 30 MOhm
Power supplyat connector (D/C- A/C voltage)
at PH 18 VA -> 11,4 V
at PH 20 VA -> 12,34 V
at PH 25 VA -> 14,8 V
Heat output for appr. 18 W
TGas = 350 °C
Heat current atappr. 1,6 A
PH 20 VAappr. 5A shortly at heating-up
PTC-characteristique
Dimensions of probe
KS1D sensorLength 115 mm; thread M18 x 1,55 mm
KS1D with housingLength 185 mm; R 1 1/4“, D=31,75 mm
Preciseness:±0,2 Vol. % O2 after balancing on air value 21 % O2
(with Lambda-probe LS1)
Setting time:<20 s on 90 % of final value (T90)
(with Lambda probe LS1 type 650 R 0001 and 450 mm MEV)
Failure impact1 % of measurement value / 10 K housing temperature Lambda probe LS1,
Deviation by temperaturetemperature compensation optional
Failure impact1,3 % of measurement value / 10 mbar pressure change / pressure compensation optional
Deviation by pressure
Ambient temperature
- operation0°C...+60°C
- transport and storage-40°C...+85°C
Supply voltage230V AC and 115 V AC
+10% / -15%, 48Hz...62Hz
To be used in grounded network lines only!
Resolution0,01% over the whole range
Time for being ready with LS11...2 hours after "POWER ON"
Measuring accuracy+/- 10% of measured value
(with Lambda Probe LS2)max. +/-0,3% by vol. O2
Settling time (90% time)T90 < 15s
Ambient temperature
- Operation -20°C...+60°C
- Transport and storage-40°C...+85°C
Power supply230 V AC und 115 V AC
+10% / -15%, 48 Hz...62Hz
Power consumptionTypically 50 VA, short-term 150 VA (probe heating-up phase)
Time for operational status approx. 10 minutes after "POWER ON"
to be achieved with
Housing:Sheet steel
Protection type following DIN 40050IP66, without display
IP54, with embedded start-up assistant inside front door
Dimensions (HxBxT) mm300 x 300 x 120
ColorGrey, RAL 7035
Weightappr. 6kg
Ambient temperature-5 °C ... + 60 °C
operation:
Ambient temperature-20 °C ... + 70 °C
transport and storage:
Power supply:120 VAC / -30%...230 VAC / +10%, 50...60Hz
Power consumption:30W (normal operation)
69W (heating)
Resolution O2:0,1 Vol. % O2 in the range of 0...18 Vol. % O2
1 Vol. % O2 in the range of 18...25 Vol. % O2
Resolution COe:1ppm in CO-range of 0…1000ppm
Preciseness of measuring: O2: ±5% of measurement value
(with combination probe KS1D)(max ± 0,3 Vol. % O2)
COe: ±25% of measurement value
(not better than +/- 20 ppm after prior calibration for application conditions with a CO-reference measuring)
Setting time (60 % time):O2: T 60 < 10 s
COe: T 60 < 2 s
Time for readinessappr. 10min after „POWER ON“
with KS1D (cold start-up)(Initial start-up appr. 60min)
Analogue output, via analogue output module:Analogue output 1 (O2 measurement value)
- Range of setting: 0…25 % O2
- Factory setting 0…10 Vol.% O2 -> 4…20 mA
Analogue output 2 (CO-measurement value)
- Range of setting: 0…1000 ppm
- Factory setting 0…1000 ppm -> 4…20 mA
Digital outputsoptional
via digital output module:
Control element:Integrated LT3 User Interface with LCD-graphic display 45x27 mm (BxH)
External start-up assistant with LCD-graphic display 60x32 mm (BxH) (Option)
Interface:LAMTEC System Bus (LSB)
Sensor TypeCarboSen
Principle of measurementsolid state electrolyte (Non-Nernst)
Measurement range0... 10 000 ppm COe
Sensor temperatureapprox. 630 °C
Sensor heater powerapprox. 3.0 W
Response time< 1 s
Sensor signal0 – 750 mV (s. curve)
Temperature range in applicationup to 450 °C (depends on housing)
Housing, electronicscustomized
Output0/4 – 20 mA and CAN-bus
Sensor type: HydroSen
Measurement principle:Solid-electrolyte (Non-Nernst)
Range of measuring:0 – 1.000 or 0 – 10.000 ppm H2 (max. 50 % UEG)
Sensor temperature:630°C
Sensor heat output:ca. 3,0 W
Reaction time of sensor element:< 1 s
Sensor signal:0 – 700 mV
Temperature - are of use:up to a maximum of 450 °C (depends on housing)
Output electronics:0/4 – 20 mA and LAMTEC system bus